Susp Lift

[bluesman17]

Will I need a longer drive shaft for a 6" suspension lift? Would 35" tires fit then?

 

[Justshootme84]

1) No.
2) Yes.

 

[sweepersrgr8]

Although, you may not be pleased with the 35's with a 6" lift, if you want to fill the fender wells.

 

[Justshootme84]

True, if you look at pics of my Bronco, it seems to have lots of room inside the wheelwells. I still get a little rubbing or contact at full suspension travel though.

 

[bluesman17]

Does my 92 have a sway bar?

 

[Guest]

It should have front and rear sway bars.

 

[Justshootme84]

Yes, there should be a front and rear anit-sway bar on your 92 Bronco. When you install the lift kit, you either have to drop the bars with brackets, or just remove them. I took both of mine off to get more suspension travel, and I haven't noticed any more body roll. In fact, it rides better than stock due to the lift kit.

 

[Bronco_In_Ny]

You might want to keep the rear sway bar if you tow, I took the front bar off but kept the rear since I tow a boat to the water. But if you don't tow get rid of the front and rear and let the axle drop another 4 to 5 in's B)