Back Window Button

[Ktomek06]

I think ima get my dad to epoxy this..but anyone know a quicker fix on how to repair this? My giant muscular body made me press this too hard.. and

 

[94_bronc]

epxy may not be strong enough you may havet replace either the switch or the gauge trim the only hard part is getting the head light knob too release from the switch

 

[88pimpin]

Weld it. There will be no more problem with the switch being unconnected.

I think if you use enough glues, it'll stick. I use some stuff in a green tube from O'Reilly's. Little squeeze-tube and twist-on top. It holds pretty good. Held my Cougar's shifter knob on, and one of the door panel pieces, too.

 

[Seabronc]

The easiest way to get the head light knoboff is to use a L shaped pick. Insert it behind the knob with the point inside the shaft area. That will allow youto release the friction catch inside the knob.

Good Luck, >-

 

[hawk2100n]

a thin coat of epoxy around the edeges will be more than enough. that stuff literraly melts it and becomes one piece sort of like welding.