1995 f-250 ext cab 4X4

[1995 f-250 4X4]

body lines on box do not line up with lines on cab on pass side whats wrong

 

[1992F250]

Probably rusted floor pan or box bed. Check the body mounting material. If your lucky its just the padding. Otherwise the rust has weakend the floor boards (more then likely) or box.

 

[1995 f-250 4X4]

Probably rusted floor pan or box bed. Check the body mounting material. If your lucky its just the padding. Otherwise the rust has weakend the floor boards (more then likely) or box.

but the has no rst any other ideas

 

[bronc76]

are you reinstalling the box?

 

[1992F250]

Check your body mounts. See if they're the same size. Look for any objects the bed might be sitting on.. Ie wrong size gas tank.. Are the bolts tightened down? Do any of the mounts look pressed in or pulled up? Some folks like to tie stuff in the bed up using the sheet metal of the bed. Maybe it got torked up? Look at your box lines, you might be able to use a level, and see if the box is warped.

 

[lostin90s]

body lines on box do not line up with lines on cab on pass side whats wrong

Its the mounts (rubber ) They compress over time. Get a complete Poly mount set (cab and front rad support. They r not hard to change just time consuming.