1982 F250 Front End shake

fyrrsq

New Member
Heres the problem. We have a 82 F250 4x4 with a vibration in the front end; only when the brakes are applied after the braking system has warmed up. The steering wheel does not shake or pulsate when brakes are applied.

Front Rotors, Pads, Calipers, brake hoses, (wheel bearings are good still) brake booster/master cyl, rear drums, shoes, inner and outer tie rods with alignment, and lock out hubs all NEW on truck... Rotated tires from front to back and issue is still there...

I just replaced the front shocks this evening, and still has issue... I am stumped... Please help

Thanks
 
Q?
AUTO HUB OR MANUAL
STICKING HUB MAY B THE PROBLEM
TILL GREASE GET HOT THEN OK ON AUTO AD SIMILAR
PROM ON MY B2 AUTO HUB
 
Heres the problem. We have a 82 F250 4x4 with a vibration in the front end; only when the brakes are applied after the braking system has warmed up. The steering wheel does not shake or pulsate when brakes are applied.

Front Rotors, Pads, Calipers, brake hoses, (wheel bearings are good still) brake booster/master cyl, rear drums, shoes, inner and outer tie rods with alignment, and lock out hubs all NEW on truck... Rotated tires from front to back and issue is still there...

I just replaced the front shocks this evening, and still has issue... I am stumped... Please help

Thanks
the brake rotors are warped. that comes from using a impact to tighten the lug nuts.
 

Members online

No members online now.

Trending content

Forum statistics

Threads
4,181
Messages
19,140
Members
5,134
Latest member
Shaggy
Back
Top